Description
Mercedes Benz XENTRY Diagnostic Kit 4 with SCN Online
Description
XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3. 09_xentry_diagnosis_kit_4-blf_en
Easier to use
The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.
XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port
Located on the front side are two buttons that you can configure individually using Config Assist
To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
Much faster
XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)
The main memory has 16 GB DDR4
1 TB SSD hard drive (with 3000 MB/s read and write speed)
More convenient
The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.
XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.
XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
| Feature | 09_xentry_diagnosis_kit_4-blf_en |
| Operating system | Windows 10 IoT LTSC Enterprise |
| Processor | Intel® CoreTM i5 |
| Main memory | 16 GB DDR4 |
| Hard drive | 1 TB SSD |
| Display | 13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare |
| Dimension | Wait approx. 338 x 240 x 33 mm (W x L x H) |
| Weight | 2.3 kg |
Product advantages
- The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
- No more diagnosis updates required – only firmware updates on rare occasions
- Can be used for all model series
- Does not require an adapter for an external power supply
| Feature | |
| Network connection | 09_xentry_diagnosis_kit_4-blf_en |
| Cabled | USB 2.0 |
| WiFi stick | 802.11b/g/n |
| Processor system | |
| Microprocessor | Intel MX6 Solo |
| RAM | RAM: 512 MB DDR3 RAM |
| ROM | 512 MB flash |
| User interface | |
| LEDs | 5 status LEDs |
| Power supply* | |
| From the vehicle battery via the diagnosis connection cable or via a connected USB cable. | 8 V to 28 V |
| Certifications | |
| VCI | FCC, CE, RoHS |
**Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.
-AdBlue Remaining Starts Reset/Removal
-NAFTA W906/7 Sprinter Vmax Removal
-FBS4 FDCT ISM Drive Authorization Fix
-Professional MB/BMW/Porsche/Ferrari/Maserat
Reviews
There are no reviews yet.