Description

iCarsoft CR PRO Professional diagnostic tool for Multi-bands vehicles

Multi-Language: English, German, Dutch, Spanish, French, Polish, Italian, Czech, Danish, Portuguese, Hungarian, Russian, Swedish, Norwegian, Finnish
Quality: Genuine
System updates: Available (Free updates lifetime)
Internet connections: Available
Warranty: 12 months
Manufacturer: iCarsoft
Made in USA

Wide Vehicle Coverage (over 40 Brands):

Nissan, Infiniti, Toyota, Lexus, Scion, Honda, Isuzu, Hyundai, Kia, Daewoo, Mazda, US Ford, Sprinter, BMW, Mini,

VW, Seat, Skoda, Volvo, Porsche, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat,

GM, Chrysler, Mercedes-Benz, Citroen, Jaguar, Peugeot, Audi ,Opel, Land Rover, Smart, Suzuki, Vauxhall, Alfa-Romeo, Lancia.

FEATURES & BENEFITS

• iCarsoft CR PRO can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and Airbag etc;
• Support OBDII/EOBD Ten Modes of Operation;
• Read Live Data;
• Full ECU Diagnosis;
• Applies to most of the vehicle models which equipped with OBDII-16 DLC;
• Easy To Use with Silicone Keys;
• DTC Library to lookup when user is operating this tool;
• Upgrade via PC;
• Multi-language: English, German, Dutch, Spanish, French(more under development);
• Oil Light/Service Reset: Support service lamp reset;
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization;
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement;
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator;
• Battery Management System (BMS), registers new battery to the BMS while battery replacement;
• Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replaces the throttle valve;
• The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports;
• Battery Test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts;
• ABS Bleeding :release the air to restore ABS Brake sensitivity, or relearn while ABS replaced;
• Injector Coding :relearn the injector control parameter while the injector renewed or replaced.

Note:

Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.

This scan tool covers over 20 years of models, so some functions may not be available on all years/models.

Professional OBD2 Functions:

1. Read Codes
2. Erase Codes
3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11. Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More…..

FIFTEEN SUPER ADVANTAGES

• Diagnose most Models (OBD2-16DLC);
• Full System Diagnosis;
• Supports Oil Service Reset;
• Electronic Parking Brake (EPB) system maintenance;
• Battery Management System (BMS) (Some vehicles do not enjoy this function);
• Diesel Particulate Filter (DPF) Regeneration Control System;
• Electronic Throttle Control System (ETC);
• Steering Angle Sensor (SAS) Calibration;
• Read &Clear DTC;
• Read Live Data;
• Supports Battery Test;
• Supports Data Review and Print;
• Full Speed Upgrade via Computer;
• 4.0’’ TFT LCD, 480*320 Pixels;
• Supports Multi-Language.

………………..

( for more, refer to User’s Manual )

NOTE:

Please kindly note :  Not all systems of all vehicles are supported

Before purchasing, if your vehicles are produced before Year 2004 or after 2014 ,

please kindly confirm with us about the compatibility first .

For functions and systems that supported, please reference the Function List of CR Pro

Specifications:

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)